Cisco Nexus 5000 Series - Show Running-Config Poe

show running-config poe
To display the running configuration for Power over Ethernet (PoE) ports, use the show running-config poe
command.
show running-config poe [all]
Syntax Description
(Optional) Displays detailed information about PoE
ports, including default settings.
all
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.5.0(3)N2(1)
Examples
This example shows how to display the running configuration for PoE ports:
switch# show running-config poe
Related Commands
DescriptionCommand
Displays the startup configuration information about
PoE ports.
show startup-config poe
Displays troubleshooting information about PoE ports.show tech-support poe
Cisco Nexus 5000 Series Interfaces Command Reference
166
Show Commands
show running-config poe