show resource
To display the number of resources currently available in the system, use the command. the show resource
command.
show resource [ resource ]
Syntax Description
Resource name, which can be one of the following:
•
port-channel -Displays the number of
EtherChannels available in the system.
•
vlan -Displays the number of VLANs available
in the system.
•
vrf -Displays the number of virtual routing and
forwardings (VRFs) available in the system
resource
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.4.0(0)N1(1a)
Examples
This example shows how to display the resources available in the system:
switch# show resource
Resource Min Max Used Unused Avail
----------- ----- ----- ------ -------- -------
vlan 16 4094 509 0 3
monitor-session 0 2 0 0 2
vrf 2 1000 2 0 998
port-channel 0 768 2 0 766
u4route-mem 32 32 1 31 31
u6route-mem 16 16 1 15 15
m4route-mem 58 58 0 58 58
m6route-mem 8 8 0 8 8
bundle-map 0 16 2 0 14
switch#
Cisco Nexus 5000 Series Interfaces Command Reference
159
Show Commands
show resource
To Next Page
Loading...
