Send feedback to nx5000-docfeedback@cisco.com
1-4
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring Smart Call Home
Information About Call Home
Call Home maps the syslog severity level to the corresponding Call Home severity level for syslog port
group messages (see the “Call Home Message Levels” section on page 1-5).
Inventory Inventory status that is provided whenever a unit is
cold booted, or when FRUs are inserted or
removed. This alert is considered a noncritical
event, and the information is used for status and
entitlement.
show inventory
show inventory fex all
show license
show license usage
show module
show sprom all
show system uptime
show version
License Events related to licensing and license violations. show license
show license usage
show logging last number
Linecard hardware Events related to standard or intelligent switching
modules.
show diagnostic result module all
show diagnostic result module
number
show module
show prom all
show tech-support ethpm
show tech-support platform
show tech-support platform
callhome
show version
Supervisor hardware Events related to supervisor modules. show diagnostic result module all
show diagnostic result module
number
show module
show prom all
show tech-support ethpm
show tech-support platform
show tech-support platform
callhome
show version
System Events generated by failure of a software system
that is critical to unit operation.
show diagnostic result module all
show diagnostic result module
number
show logging last number
show module
show prom all
show system reset-reason
show system resources
show system uptime
show tech-support
show tech-support ethpm
show tech-support platform
Table 1-1 Alert Groups and Executed Commands (continued)
Alert Group Description Executed Commands
To Next Page
Loading...
