Cisco Nexus 5000 Series - Verifying Call Home Configuration; Call Home Example Configuration

Send feedback to nx5000-docfeedback@cisco.com
1-15
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring Smart Call Home
Verifying Call Home Configuration
Verifying Call Home Configuration
To display Call Home configuration information, perform one of the following tasks:
Call Home Example Configuration
The following example uses CFS to create a destination profile called Noc101, associate the Cisco-TAC
alert group to that profile, and configure contact and e-mail information to all CFS-enabled devices.
configure terminal
snmp-server contact person@company.com
callhome
email-contact admin@Mycompany.com
phone-contact +1-800-123-4567
street-address 123 Anystreet st. Anytown,AnyWhere
destination-profile Noc101 full-text
destination-profile full-text-destination email-addr person@company.com
destination-profile full-text-destination message-level 5
destination-profile Noc101 alert-group Configuration
alert-group Configuration user-def-cmd “show ip routing”
transport email smtp-server 192.0.2.10 use-vrf Red
enable
commit
Default Settings
Table 1-3 lists the default settings for Call Home parameters.
Command Purpose
show callhome
Displays the status for Call Home.
show callhome destination-profile name
Displays one or more Call Home destination
profiles.
show callhome diagnostic signature
Displays the attributes and statistics of a
call-home diagnostic signature file.
show callhome smart-licensing
Displays the call home smart licensing
information.
show callhome transport-email
Displays the e-mail configuration for Call Home.
show callhome user-def-cmds
Displays CLI commands added to any alert
groups.
show running-config [callhome |
callhome-all]
show startup-config callhome
Displays the running configuration for Call
Home.
show startup-config callhome
Displays the startup configuration for Call Home.
show tech-support callhome
Displays the technical support output for Call
Home.