Cisco Nexus 5000 Series - Default Port Tracking Settings

Send feedback to nx5000-docfeedback@cisco.com
1-7
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring Port Tracking
Default Port Tracking Settings
Linked to 1 port(s)
Port linked to interface fc2/1
...
The following example shows how to display the port track mode:
switch# show interface fc 2/4
fc2/4 is up
Hardware is Fibre Channel, FCOT is short wave laser
...
Transmit B2B Credit is 64
Receive B2B Credit is 16
Receive data field Size is 2112
Beacon is turned off
Port track mode is force_shut
<--this port remains shut even if the tracked port is back up
Default Port Tracking Settings
Table 1-1 lists the default settings for port tracking parameters.
Table 1-1 Default Port Tracking Parameters
Parameters Default
Port tracking Disabled
Operational binding Enabled along with port tracking