Cisco Nexus 5000 Series - Snmp Example Configuration

Send feedback to nx5000-docfeedback@cisco.com
1-13
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring SNMP
SNMP Example Configuration
SNMP Example Configuration
This example configures Cisco Nexus 5000 Series to send the Cisco linkUp/linkDown notifications to
one notification host receiver and defines two SNMP users, Admin and NMS:
configuration terminal
snmp-server contact Admin@company.com
snmp-server user Admin auth sha abcd1234 priv abcdefgh
snmp-server user NMS auth sha abcd1234 priv abcdefgh enginID
00:00:00:63:00:01:00:a1:ac:15:10:03
snmp-server host 192.0.2.1 informs version 3 auth NMS
snmp-server host 192.0.2.1
snmp-server enable traps link cisco
Default Settings
Table 1-3 lists the default settings for SNMP parameters.
Table 1-3 Default SNMP Parameters
Parameters Default
license notifications enabled
linkUp/Down notification type ietf-extended