Cisco Nexus 5000 Series - Zone Sets

Send feedback to nx5000-docfeedback@cisco.com
1-8
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring and Managing Zones
Zone Sets
The following example shows how to configure zone members:
switch(config-zone)# member type value
pWWN example:
switch(config-zone)# member pwwn 10:00:00:23:45:67:89:ab
Fabric pWWN example:
switch(config-zone)# member fwwn 10:01:10:01:10:ab:cd:ef
FC ID example:
switch(config-zone)# member fcid 0xce00d1
FC alias example:
switch(config-zone)# member fcalias Payroll
Domain ID example:
switch(config-zone)# member domain-id 2 portnumber 23
Local sWWN interface examples:
switch(config-zone)# member interface fc 2/1
Remote sWWN interface example:
switch(config-zone)# member interface fc2/1 swwn 20:00:00:05:30:00:4a:de
Domain ID interface example:
switch(config-zone)# member interface fc2/1 domain-id 25
Zone Sets
This section describes zone sets and includes the following topics:
• Activating a Zone Set, page 1-9
• About the Default Zone, page 1-10
• Configuring the Default Zone Access Permission, page 1-10
• About FC Alias Creation, page 1-10
• Creating FC Aliases, page 1-11
• Creating Zone Sets and Adding Member Zones, page 1-12
• Zone Enforcement, page 1-12