Cisco Nexus 5000 Series - Committing the Rscn Timer Configuration Changes; Discarding the Rscn Timer Configuration Changes

Send feedback to nx5000-docfeedback@cisco.com
1-9
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Managing FLOGI, Name Server, FDMI, and RSCN Databases
RSCN
Locking the Fabric
The first action that modifies the database creates the pending database and locks the feature in the
VSAN. Once you lock the fabric, the following situations apply:
• No other user can make any configuration changes to this feature.
• A copy of the configuration database becomes the pending database along with the first active
change.
Committing the RSCN Timer Configuration Changes
If you commit the changes made to the active database, the configuration is committed to all the switches
in the fabric. On a successful commit, the configuration change is applied throughout the fabric and the
lock is released.
To commit RSCN timer configuration changes, perform this task:
Discarding the RSCN Timer Configuration Changes
If you discard (abort) the changes made to the pending database, the configuration database remains
unaffected and the lock is released.
To discard RSCN timer configuration changes, perform this task:
Clearing a Locked Session
If you have changed the RSCN timer configuration and have forgotten to release the lock by either
committing or discarding the changes, an administrator can release the lock from any switch in the
fabric. If the administrator performs this task, your changes to the pending database are discarded and
the fabric lock is released.
Tip The pending database is only available in the volatile directory and are subject to being discarded if the
switch is restarted.
To use administrative privileges and release a locked DPVM session, use the clear rscn session vsan
command in EXEC mode. The following example shows how to clear the RSCN session for VSAN 10:
switch# clear rscn session vsan 10
Command Purpose
Step 1
switch# configuration terminal
switch(config)#
Enters configuration mode.
Step 2
switch(config)# rscn commit vsan timeout
Commits the RSCN timer changes.
Command Purpose
Step 1
switch# configuration terminal
switch(config)#
Enters configuration mode.
Step 2
switch(config)# rscn abort vsan timeout
Discards the RSCN timer changes and clears the
pending configuration database.