Cisco Nexus 5000 Series - Clearing Fspf Counters for an Interface; Fspf Routes; About Fibre Channel Routes

Send feedback to nx5000-docfeedback@cisco.com
1-9
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring Fibre Channel Routing Services and Protocols
FSPF Routes
Clearing FSPF Counters for an Interface
To clear the FSPF statistics counters for an interface, perform this task:
FSPF Routes
FSPF routes traffic across the fabric, based on entries in the FSPF database. These routes can be learned
dynamically, or configured statically.
This section includes the following topics:
• About Fibre Channel Routes, page 1-9
• Configuring Fibre Channel Routes, page 1-10
About Fibre Channel Routes
Each port implements forwarding logic, which forwards frames based on its FC ID. Using the FC ID for
the specified interface and domain, you can configure the specified route (for example, FC ID 111211
and domain ID 3) in the switch with domain ID 1 (see Figure 1-3).
Figure 1-3 Fibre Channel Routes
Command Purpose
switch# clear fspf counters vsan vsan-id
interface fc slot/port
Clears the FSPF statistics counters for the
specified interface in the specified VSAN.
fc1/1
Domain ID 1 Domain ID 3
FC ID 111211
Domain ID 7
79944