Send feedback to nx5000-docfeedback@cisco.com
1-16
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring Smart Call Home
Additional References
Additional References
For additional information related to implementing Call Home, see the following sections:
• Message Formats, page 1-16
• Sample syslog Alert Notification in Full-Text Format, page 1-19
• Sample syslog Alert Notification in XML Format, page 1-20
Message Formats
Call Home supports the following message formats:
• Short Text Message Format
• Common Fields for All Full Text and XML Messages
• Inserted Fields for a Reactive or Proactive Event Message
• Inserted Fields for an Inventory Event Message
• Inserted Fields for a User-Generated Test Message
Table 1-4 describes the short text formatting option for all message types.
Table 1-3 Default Call Home Parameters
Parameters Default
Destination message size for a message sent in full
text format.
4000000
Destination message size for a message sent in
XML format.
4000000
Destination message size for a message sent in
short text format.
4000
SMTP server port number if no port is specified. 25
Alert group association with profile. All for full-text-destination and
short-text-destination profiles. The cisco-tac alert
group for the CiscoTAC-1 destination profile.
Format type. XML
Call Home message level. 0 (zero)
Table 1-4 Short Text Message Format
Data Item Description
Device identification Configured device name
Date/time stamp Time stamp of the triggering event
Error isolation message Plain English description of triggering event
Alarm urgency level Error level such as that applied to system message
To Next Page
Loading...
