Cisco Nexus 5000 Series - Page 357

Send feedback to nx5000-docfeedback@cisco.com
1-17
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring Smart Call Home
Additional References
Table 1-6 describes the common event message format for full text or XML.
Table 1-5 Common Fields for All Full Text and XML Messages
Data Item
(Plain Text and XML)
Description
(Plain Text and XML)
XML Tag
(XML Only)
Time stamp Date and time stamp of event in ISO time notation:
YYYY-MM-DD HH:MM:SS GMT+HH:MM.
/aml/header/time
Message name Name of message. Specific event names are listed in the Table 1-4. /aml/header/name
Message type Name of message type, such as reactive or proactive. /aml/header/type
Message group Name of alert group, such as syslog. /aml/header/group
Severity level Severity level of message (see “Call Home Message Levels” section on
page 1-5).
/aml/header/level
Source ID Product type for routing. Specifically Catalyst 6500. /aml/header/source
Device ID Unique device identifier (UDI) for end device that generated the
message. This field should be empty if the message is nonspecific to a
device. The format is type@Sid@serial.
• type is the product model number from backplane IDPROM.
• @ is a separator character.
• Sid is C, identifying the serial ID as a chassis serial number·
• serial is the number identified by the Sid field.
An example is WS-C6509@C@12345678
/aml/ header/deviceId
Customer ID Optional user-configurable field used for contract information or other
ID by any support service.
/aml/ header/customerID
Contract ID Optional user-configurable field used for contract information or other
ID by any support service.
/aml/ header /contractId
Site ID Optional user-configurable field used for Cisco-supplied site ID or
other data meaningful to alternate support service.
/aml/ header/siteId
Server ID If the message is generated from the device, this is the unique device
identifier (UDI) of the device.
The format is type@Sid@serial.
• type is the product model number from backplane IDPROM.
• @ is a separator character.
• Sid is C, identifying the serial ID as a chassis serial number·
• serial is the number identified by the Sid field.
An example is WS-C6509@C@12345678
/aml/header/serverId
Message description Short text that describes the error. /aml/body/msgDesc
Device name Node that experienced the event (host name of the device). /aml/body/sysName
Contact name Name of person to contact for issues associated with the node that
experienced the event.
/aml/body/sysContact
Contact e-mail E-mail address of person identified as the contact for this unit. /aml/body/sysContactEmail