Cisco Nexus 5000 Series - Page 462

Send feedback to nx5000-docfeedback@cisco.com
1-10
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring N Port Virtualization
Verifying NPV
----------------------------------------
Server-If External-If(s)
----------------------------------------
fc1/3 fc1/10,fc1/11
fc1/5 fc1/1,fc1/2
----------------------------------------
To display the NPV internal traffic details, enter the show npv internal info traffic-map command.
To display the disruptive load-balancing status, enter the show npv status command:
switch# show npv status
npiv is enabled
disruptive load balancing is enabled
External Interfaces:
====================
Interface: fc2/1, VSAN: 2, FCID: 0x1c0000, State: Up
...