Send feedback to nx5000-docfeedback@cisco.com
1-17
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring Fibre Channel Routing Services and Protocols
Default Settings
Distribution tree information Derived from the principal switch (root node).
Routing table FSPF stores up to 16 equal cost paths to a given
destination.
Load balancing Based on destination ID and source ID on different, equal
cost paths.
In-order delivery Disabled.
Drop latency Disabled.
Static route cost If the cost (metric) of the route is not specified, the
default is 10.
Remote destination switch If the remote destination switch is not specified, the
default is direct.
Multicast routing Uses the principal switch to compute the multicast tree.
Table 1-2 Default FSPF Settings (continued)
Parameters Default
To Next Page
Loading...
