Managing the System
Backup
Cisco Small Business NSS300 Series Smart Storage Administration Guide 204
3
CAUTION Do not remove an external drive from the NAS while backup is in progress.
STEP 7 Click Apply. Back up to an external device begins.
USB One Touch Copy
From the Backup > USB One Touch Copy window, you can configure the function
of the USB one touch copy button. The following three functions are available:
• Copy from the front USB storage to a specified directory of the internal
drive of the NAS.
• Copy to the front USB storage from a specified directory of the internal
drive of the NAS.
• Disable the one touch copy button.
To configure the USB One Touch Copy feature:
STEP 1 Choose Backup > USB One Touch Copy from the Navigation menu. The USB One
Touch Co py window opens.
STEP 2 Click one of the behaviors of the USB One Touch Copy button.
STEP 3 Click Apply. Your USB One Touch Copy settings are updated to the NAS.
To Next Page
Loading...
Need help?
General
