Getting Started
Starting NAS Configuration
Cisco Small Business NSS300 Series Smart Storage Administration Guide 30
2
If you choose yes, the disk volume is encrypted with a password and provides an
extra layer of security against the theft of data in the event that disks are stolen.
File transfer performance to encrypted volumes is generally lower than non-
encrypted volumes.The default encryption password is the password of the
administrator account.
STEP 23 Click Next. The Finish window displays the server configuration.
STEP 24 Click Start Installation. System begins initializing and the configuration progress
is displayed.
When the configuration is complete, you are returned to the Configuring the NAS
window in the Setup Wizard.
STEP 25 From the Configuring the NAS window, click Next to continue to Map a Network
Drive. The Map Network Drive window opens. Continue to Mapping a Network
Drive, page 33.
System Configuration Using the LCD Display
After connecting the equipment and pressing the Power button, the system boots,
loads the driver, and mounts the volume. You can optionally configure the NAS
device using the options in the LCD display.
NOTE If you have configured the NAS using the Setup Wizard, you do not need to setup
the NAS using the LCD display.
NOTE System configuration using the LCD display is supported on the NSS324 and
NSS326.
To Next Page
Loading...
Need help?
General
