Using the LCD Display
Viewing System Information Using the LCD Display
Cisco Small Business NSS300 Series Smart Storage Administration Guide 260
7
Reboot
Use the Reboot option to restart the NAS.
To reboot the NAS:
STEP 1 From the Main Menu, press the Select button until the Reboot option is displayed.
STEP 2 Press the Select button to select Yes.
STEP 3 Press the Enter button to confirm.
Password
The default password of the LCD display is blank. Enter the Password option to
change the password of the LCD display.
NOTE The LCD password is not the same as the “admin” account password.
To change the password of the LCD display:
STEP 1 From the Main Menu, press the Select button until the Password option is
displayed. The following is shown:
STEP 2 Select Yes to continue.
STEP 3 Enter a password with a maximum of eight numeric characters (0-9).
STEP 4 When the cursor moves to OK, press the Enter button. To confirm the changes,
verify the password.
C h a n g e P a s s w o r d
Y e s N o
N e w P a s s w o r d :
O K
To Next Page
Loading...
