NAS Maintenance
Power Outage or Abnormal Shutdown
Cisco Small Business NSS300 Series Smart Storage Administration Guide 247
5
Power Outage or Abnormal Shutdown
In case of a power outage or improper shutdown of the NAS, it will resume to the
state before it is shut down.
NOTE Other power outage options are available from the External Device >
UPS Settings window.
If your NAS does not function properly after restart, do the following:
STEP 1 If the system configuration is lost, configure the system again.
STEP 2 In the event of abnormal operation of the NAS, contact customer service for
technical support.
System Software Abnormal Operation
If the system software does not operate properly, the NAS automatically restarts
to resume normal operation. If you find that the system restarts continuously, it may
fail to resume normal operation. In this case, contact technical support.
System Temperature Protection
The system shuts down automatically for hardware protection if any of the
following criteria is met:
• The system temperature exceeds 70°C (158°F)
•The CPU temperature exceeds 85°C (185°F)
• The hard drive temperature exceeds 65°C (149°F)
To Next Page
Loading...
Need help?
General
