Managing the System
Administration
Cisco Small Business NSS300 Series Smart Storage Administration Guide 92
3
STEP 4 In the UDP Port field, enter the UDP port number used to transmit syslog
messages. Default is 514.
STEP 5 Select the logs to record.
• System Event Logs—Enable to record the system event logs.
• System Connection Logs—Enable to record the system connection logs.
You must enable and configure the syslog server from Applications > Syslog
Server in order to use this feature.
STEP 6 Click Apply to save the syslog settings.
Firmware Upgrade
From the Administration > Firmware Upgrade window, you can view the current
firmware version and update the firmware on the NAS. The current NAS settings
will not change while performing the firmware version update.
CAUTION As a precautionary measure, backup the NAS system configuration before
upgrading the firmware.
To Next Page
Loading...
Need help?
General
