Managing the System
Administration
Cisco Small Business NSS300 Series Smart Storage Administration Guide 91
3
• Add to the block list—Select to block the selected IP address.
- From the drop-down list, select the time frame that you want the IP
address to be blocked.
• Disconnect this connection and block the IP—Select to disconnect the
connection and also block the IP address.
STEP 3 Click OK to save the settings or click Cancel to exit.
Syslog
From the Administration > System Log Settings > Syslog window, you can enable
syslog to save the event logs and connection logs to a remote syslog server.
Syslog is a standard for forwarding log messages in an IP network. The NAS has a
built-in syslog server. For more information, see Syslog Server, page 194.
To configure the syslog settings:
STEP 1 Choose Administration > System Log Settings > Syslog from the Navigation
menu. The Syslog window opens.
STEP 2 Click Enable syslog.
STEP 3 Enter the hostname or IP address of the syslog server in the Syslog Server IP field.
To Next Page
Loading...
Need help?
General
