NAS Maintenance
Restart or Shut Down the NAS
Cisco Small Business NSS300 Series Smart Storage Administration Guide 242
5
Restart or Shut Down the NAS
Follow the steps below to restart or shut down the NAS.
STEP 1 Choose Administration > Power Management from the Navigation menu. The
Power Management window opens.
STEP 2 To restart the NAS immediately, click RESTART. To shutdown the NAS immediately,
click SHUTDOWN.
You can also press the power button for 5 seconds to turn off the NAS. The NAS
beeps once and shuts down immediately.
Hardware System Reset
There are two ways to reset the NAS system hardware: basic and advanced.
NOTE Hardware system reset as described in this chapter is different from the
Administration > Restore to Factory Default command. See Restore to Factory
Default, page 93 more details regarding the Restore to Factory Default
command.
To Next Page
Loading...
Need help?
General
