Managing the System
External Device
Cisco Small Business NSS300 Series Smart Storage Administration Guide 231
3
To remove a partition from an external device:
STEP 1 Connect an external device to the NAS.
STEP 2 Choose External Device > External Storage Device from the Navigation menu.
The External Storage Device window opens.
STEP 3 Select the external storage device from the window.
STEP 4 Click Remove Disk Partition. The disk partition is removed from the selected
external device.
To remove an external device from the NAS:
STEP 1 Choose External Device > External Storage Device from the Navigation menu.
The External Storage Device window opens.
STEP 2 Select the external storage device from the window.
STEP 3 Click Remove Device. The selected external device is removed from the NAS.
UPS Settings
The NAS supports connection to an Uninterruptible Power Supply (UPS) to protect
your system from abnormal system shutdown caused by a power outage. From
the External Device > UPS Settings window, you can enable UPS support and
configure the UPS settings, model and IP address.
The UPS Information area shows the UPS brand, model, AC power status, battery
capacity, and estimated protection time for your UPS. If these fields are not filled,
either the UPS is not communicating with the NAS or it does not provide this
information to the NAS.
To Next Page
Loading...
Need help?
General
