Cisco NSS32 User Manual

Using the LCD Display
System Configuration Using the LCD Display
Cisco Small Business NSS300 Series Smart Storage Administration Guide 253
7
Use the Select and Enter button when configuring the disks using the LCD display.
The following shows the location of the Select and Enter button on the NSS326.
The location is the same on the front panel of the NSS324.
To configure the disks using the LCD display:
STEP 1 At the prompt Config Disks? in the LCD display, press Select to choose the disk
configuration.
For example, when you power on the NAS with five disks installed, the LCD display
shows:
Number Item Description
1Enter
Displays options for configuration or status such as
bootup progress, disk configuration, and volume. After
configuration, you can view the hostname and IP address.
2Select
Press Select to confirm a configuration or menu option.
ENTER
SELECT
197975
STATUS LAN USB eSATA
NSS 326
Smart Storage
1 2
C o n f i g . D i s k s ?
R A I D 5

Cisco NSS32 Specifications

General

Brand	Cisco
Model	NSS32
Category	Storage
Language	English