EasyManuals Logo

Cisco NSS32 User Manual

Cisco NSS32
265 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Getting Started
Starting NAS Configuration
Cisco Small Business NSS300 Series Smart Storage Administration Guide 27
2
The server name can be a maximum length of 14 characters, which supports
alphanumeric characters (a-z, 0-9) and hyphens (-). It is required that the server
name begin with a letter versus a number. The server name does not accept
names with a space or period (.)
STEP 13 Click Next. You are redirected to a window where you can change the
administrator password.
NOTE The default administrator username is admin. The default administrator password
is admin.
STEP 14 Change the administrator password by entering the new password in the
Password field. To verify the password, re-enter it in the Verify Password field.
STEP 15 Click Next. You are redirected to a window where you can enter the date, time,
and time zone for the server.
STEP 16 Enter the date, time, and time zone for this server. The options are:
Time Zone—Select a time zone from the drop-down menu.
Date/Time—Select the current date and time from the drop-down menus.
Synchronize with an Internet time server automaticallyTo obtain time
automatically from an NTP server, click this check box.
Server—From the drop-down list, select the NTP server name and click
TEST to verify status.
For example:
- time-a.timefreq.bldrdoc.gov (default)
- time-b.timefreq.bldrdoc.gov
- time-c.timefreq.bldrdoc.gov
Set the server time the same as your computer timeTo synchronize the
server time/clock with the time/clock on your computer, click this check box.
STEP 17 Click Next. You are redirected to a window where you can enter the IP address,
subnet mask, and default gateway for the device.
STEP 18 Enter the IP address, subnet mask, and default gateway for this server. You can
either acquire the IP address automatically from a DHCP server or choose to
configure a static IP address.
Obtain TCP/IP settings automatically via DHCP—Click this check box to
acquire the IP address from a DHCP server. This is enabled by default.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco NSS32 and is the answer not in the manual?

Cisco NSS32 Specifications

General IconGeneral
BrandCisco
ModelNSS32
CategoryStorage
LanguageEnglish

Related product manuals