Managing the System
Administration
Cisco Small Business NSS300 Series Smart Storage Administration Guide 80
3
To configure power management:
STEP 1 Choose Administration > Power Management from the Navigation menu. The
Power Management window opens.
STEP 2 Set the parameters:
• Restart/ Shutdown—To restart the NAS immediately, click RESTART. To
shutdown the NAS immediately, click SHUTDOWN.
• Configure Wake on LAN—Enable this option to power on the NAS remotely
by Wake on LAN. If enabled, this feature allows the NAS to be powered on
remotely from the LAN by the NSS Discovery Tool included on the Setup
Wizard CD.
NOTE If the power connection is physically removed when the NAS is turned
off, Wake on LAN will not function whether or not the power supply is
reconnected afterwards.
- Enable—Click to enable Wake on LAN.
- Disable—Click to disable Wake on LAN.
• When the AC power resumes—Specify the action the NAS should take
when the power resumes after power loss.
- Resume the server to the previous power-on or power-off status—
The NAS will return to its previous power-on or power-off status.
To Next Page
Loading...
Need help?
General
