Cisco Unity User Manual

UNITY INSTALLATION GUIDE
110
Upgrading a Unity or
Continued
ActiveFax server
Resetting the Dialogic quiet parameter
Do the following procedure if the Unity server contains Dialogic
voice boards and if you are:
◆
Upgrading Unity and ActiveFax to version 2.4
◆
Adding or changing voice boards, even if you are adding
boards of the same type.
You reset the quiet parameter to the value you identified in the
procedure “To determine the current setting for the Dialogic
quiet parameter,” on page 101.
To reset the quiet parameter (Dialogic voice boards
only)
a Shut down Unity if it is running.
b On the Windows Start menu, click Programs > Dialogic Sys-
tem Software > Dialogic Configuration Manager–DCM.
The tree-structured list contains an entry for each Dialogic
board installed in the server.
c On the Service menu, click “Stop service.”
d Double-click the first board in the tree list. The Properties
dialog box for the board appears.
e Click the Misc tab.
f Under “Parameter,” click “ParameterFile.”
g In the “Value” box, type quietXX.prm (where XX = the
-dBm level of the desired quiet parameter file; for example,
quiet50.prm).
h Click “OK.”
i Repeat steps d through h for any additional boards.
j Shut down and restart the Unity server.

Cisco Unity Specifications

General

Supported Operating Systems	Windows Server
Database Support	Microsoft SQL Server
Type	Voicemail and Unified Messaging
Integration	Microsoft Exchange
Voicemail Storage	Depends on configuration and storage capacity
User Capacity	Varies by version and configuration
Languages Supported	Multiple languages
Security Features	Encryption, Access Control