Cisco Unity User Manual

CHAPTER 3:
Installing a Unity system
37
i If you are installing multiple voice boards that have SC or
CT bus connectors, cable the boards together. On each
board, connect the cable so the red stripe on the cable cor-
responds with pin 1 on the board connector. Confirm that
the connectors are firmly seated.
If the cable has more connectors than the server has voice
boards, use the first and last connectors, and leave unused
connectors in the middle of the cable. If the end of a cable is
allowed to dangle loose, it can act as a radio antenna and
pick up noise from the bus.
If you are cabling three or more boards together, connect
the first connector on the cable to the first board, the sec-
ond connector to the second board, and so on.
j Replace the cover of the server or expansion chassis.
Continued

Cisco Unity Specifications

General

Supported Operating Systems	Windows Server
Database Support	Microsoft SQL Server
Type	Voicemail and Unified Messaging
Integration	Microsoft Exchange
Voicemail Storage	Depends on configuration and storage capacity
User Capacity	Varies by version and configuration
Languages Supported	Multiple languages
Security Features	Encryption, Access Control