Product Overview
Front Panel
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 6
3
Front Panel
The LEDs on the front panel of the access point display information about network
activity.
Power LED—Lights up and remains lit when the access point is powered on.
PoE LED—Lights up when the access point is powered through an Ethernet
cable.
Wireless LED—Lights up when the wireless module is active on the access
point.
This LED flashes when the access point is actively sending to or receiving data
from a wireless device.
Ethernet LED—Lights up when the access point successfully connects to a
device through the Ethernet network port.
This LED flashes when the access point is actively sending to or receiving data
from one of the devices over the Ethernet network port
To Next Page
Loading...
