Cisco WAP200 Administration Guide

Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster iii
Contents
Chapter 1: Introduction 1
Chapter 2: Planning Your Wireless Network 2
Network Topology 2
Roaming 3
Network Layout 3
Example of a Simple Wireless Network 4
Chapter 3: Product Overview 5
Front Panel 6
Back Panel 7
Antennas and Positions 8
Chapter 4: Installing the Access Point 9
Placement Tips 9
Stand Option 10
Wall-Mount Option 11
Connecting the Equipment 12
Using a PoE Switch to Connect the WAP200 to the Network 12
Using a Standard Switch to Connect the WAP200 to the Network 13
Verifying the Hardware Installation 14
Chapter 5: Getting Started 15
Before You Begin 15
Accessing the Web-Based Configuration Utility 15
Navigating the Web-Based Utility 16
Setup 16
Wireless 17
AP Mode 17
Administration 17
Status 18

Cisco WAP200 Specifications

General

Networking standards	IEEE 802.3af, IEEE 802.11b, IEEE 802.11g
Supports ISDN connection	No
DHCP client	Yes
DHCP server	-
Security algorithms	WEP, WPA, WPA2
Dimensions (WxDxH)	170 x 195 x 205 mm
Storage temperature (T-T)	20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Wi-Fi standards	802.11g, 802.11b
Top Wi-Fi standard	802.11g
Ethernet LAN (RJ-45) ports	1
Product color	Gray

Weight and Dimensions

Weight	400 g