Cisco WAP200 Administration Guide

Configuring the WAP200 Access Point
Configuring Wireless Settings
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 45
6
STEP 5 To automatically capture the MAC addresses of each client to block, click
Wireless Client List.
A window appears to let you select each MAC address from the table. The
selected MAC address is copied into the Connection Control List.
Alternatively, manually enter the MAC addresses of the wireless client devices you
want to disallow, in the text boxes labeled MAC 01-16.
STEP 6 Click Save.
Configuring Advanced Settings
This Wireless > Advanced Settings window allows you to configure the advanced
settings for the access point.
We recommend to let your access point automatically adjust the parameters for
maximum data throughput.

Cisco WAP200 Specifications

General

Networking standards	IEEE 802.3af, IEEE 802.11b, IEEE 802.11g
Supports ISDN connection	No
DHCP client	Yes
DHCP server	-
Security algorithms	WEP, WPA, WPA2
Dimensions (WxDxH)	170 x 195 x 205 mm
Storage temperature (T-T)	20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Wi-Fi standards	802.11g, 802.11b
Top Wi-Fi standard	802.11g
Ethernet LAN (RJ-45) ports	1
Product color	Gray

Weight and Dimensions

Weight	400 g