Cisco WAP200 Administration Guide

C
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 85
Specifications
This appendix lists the specifications of the Cisco WAP200 Wireless-G Access
Point with Power Over Ethernet and Rangebooster.
Specifications
Setup/Configuration
Model
WAP200
Standards
IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,
IEEE802.3af (Power Over Ethernet),802.1p (QoS priority),
802.1q (VLAN), 802.1X (Security Authentication), 802.11i
- Ready (Security WPA2), 802.11e - Ready (Wireless
QoS), 802.11F (Wireless Roaming)
Ports
10/100 Base-T Ethernet, 12 VDC Power
Buttons
Reset
Cabling Type
UTP CAT 5
LEDs
Power, POE, Wireless, Ethernet
Operating System
Linux
Web UI
Built-in web user interface (UI) for easy browser-based
configuration (HTTP/HTTPS)

Cisco WAP200 Specifications

General

Networking standards	IEEE 802.3af, IEEE 802.11b, IEEE 802.11g
Supports ISDN connection	No
DHCP client	Yes
DHCP server	-
Security algorithms	WEP, WPA, WPA2
Dimensions (WxDxH)	170 x 195 x 205 mm
Storage temperature (T-T)	20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Wi-Fi standards	802.11g, 802.11b
Top Wi-Fi standard	802.11g
Ethernet LAN (RJ-45) ports	1
Product color	Gray

Weight and Dimensions

Weight	400 g