Configuring the WAP200 Access Point
Configuring Wireless Settings
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 43
6
Configuring Connection Control
The Wireless > Connection Control window displays the wireless connection
settings, and allows you to configure the Connection Control List to either permit
or block specific wireless client devices connecting to (associating with) the
access point.
Disabling Wireless Connection Control
You can use the Wireless Connection Control window to disable wireless
connection control.
To disable wireless connection control for your access point, follow these steps:
STEP 1 Click Wireless > Connection Control.
STEP 2 From the Select SSID drop-down menu, select the SSID of the wireless network
that you want to disable.
STEP 3 In the connection control section, click Disabled (default).
STEP 4 Click Save.
To Next Page
Loading...
