Cisco WAP200 - Configuring Intrusion Alarm Event Log Settings; Configuring E-Mail Notification Settings

Configuring the WAP200 Access Point
Configuring Security Monitor Settings
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 57
6
Configuring Intrusion Alarm Event Log Settings
The Security Monitor > Intrusion Alarm window displays the access point’s
security monitor intrusion alarm event logging / notification settings for E-mail
Notification and SYSLOG Notification.
Configuring E-mail Notification Settings
To configure e-mail notification settings for the access point, follow these steps:
STEP 1 Click Security Monitor > Intrusion Alarm.
STEP 2 Enter the e-mail address of Recipient to whom the alarm notifications are sent.