Cisco WAP200 - Setting up Your Access Point; Configuring Basic Setup Settings

Configuring the WAP200 Access Point
Setting Up Your Access Point
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 20
6
Setting Up Your Access Point
This section describes how to configure the general settings of the access point:
• Configuring Basic Setup Settings, page 20
• Configuring Time Settings, page 23
Configuring Basic Setup Settings
The Setup > Basic Setup window displays the general settings of the access
point.
You can configure the following basic setup settings:
• Configuring Basic Setup Settings, page 21
• Configuring Network Setup Settings, page 22