Cisco WAP200 Administration Guide

Specifications
Management
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster 86
C
Management
Operating Modes
Wireless
SNMP Version
SNMP Version 1, 2c, and 3
Event Logging
E-mail notification
Remote Syslog
Web F/W upgrade
Firmware upgradeable through web-browser
Diags: Flash, etc.
Flash, RAM, LAN, WLAN
DHCP
DHCP Client
Access Point
Access Point Mode, point-to-point Bridge Mode, point-
to-multipoint Bridge Mode, Repeater Mode
Spec/Modulation
Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM
Channels
Operating Channels: 11 North America
13 Most of Europe (ETSI and Japan)
# of Internal Ant.
None
# of External Ant.
2 (Omni-Directional) SMA detachable
Transmit Power
dBm
Transmit Power (Adjustable) @ Normal Temp Range:
11b - 18 dBm
11g - 14 dBm

Cisco WAP200 Specifications

General

Networking standards	IEEE 802.3af, IEEE 802.11b, IEEE 802.11g
Supports ISDN connection	No
DHCP client	Yes
DHCP server	-
Security algorithms	WEP, WPA, WPA2
Dimensions (WxDxH)	170 x 195 x 205 mm
Storage temperature (T-T)	20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Wi-Fi standards	802.11g, 802.11b
Top Wi-Fi standard	802.11g
Ethernet LAN (RJ-45) ports	1
Product color	Gray

Weight and Dimensions

Weight	400 g