Citrix ADC MPX Series User Manual

Citrix ADC MPX
5. Verify the replacement drive is recognized.
1 root@ns# atacontrol status ar0
Output:
1 ar0: ATA RAID1 status: DEGRADED
2 subdisks:
3 0 ad4 SPARE
4 1 ad6 ONLINE
6. Start the rebuild process.
1 root@ns# atacontrol rebuild ar0
7. Monitor the rebuild process.
1 root@ns# atacontrol status ar0
Output:
1 ar0: ATA RAID1 status: REBUILDING 10% completed
2 subdisks:
3 0 ad4 SPARE
4 1 ad6 ONLINE
Note: Rebuilding the RAID array takes some time.
8. Verify the REBUILD is successful.
1 root@ns# atacontrol status ar0
Output:
1 ar0: ATA RAID1 status: READY
2 subdisks:
3 0 ad4 ONLINE
4 1 ad6 ONLINE
Note: Aer the rebuild operation completes, the subdisks status shows ONLINE and the RAID
status shows READY.
9. Exit the shell and verify the status of the RAID array from the Citrix ADC CLI.
1 root@ns# exit
2 >sh raid
© 1999-2019 Citrix Systems, Inc. All rights reserved. 100

Citrix ADC MPX Series Specifications

General

Type	Application Delivery Controller
Memory	Up to 256 GB
Power Supply	Redundant
Product Series	MPX
Ports	10/25/40/100 Gbps Ethernet
Operating System	Citrix ADC
Management	Citrix ADM
Form Factor	Rack-mountable