Citrix ADC MPX Series User Manual

Citrix ADC MPX
The following components are visible on the back panel of the MPX 15000-50G appliances:
• Two 480 GB removable solid-state drive (SSD). These appliances have a redundant array of in-
dependent disks (RAID) devices. In a RAID configuration, the same data is stored on multiple
drives to improve performance, increase storage capacity, lower the risk of data loss, and pro-
vide fault tolerance. The two SSDs store the same data. If one fails and you replace it, the new
SSD mirrors the other one.
• Power switch, which turns power to the appliance on or o.
– Ifthe OS is functional, press the switch for less than two seconds to power down the system
with a graceful shutdown.
– If the OS is not responsive, press the power switch for more than 4 seconds to force the
power o.
• Two hot-swappable 100–240 VAC input power supply modules. Each power supply has an LED
indicating its status:
LED Color LED Indicates
OFF No power to any power supply on the
appliance.
Flashing RED No power to this power supply.
Flashing GREEN Power supply is in standby mode.
GREEN Power supply is functional.
RED Power supply failure.
© 1999-2019 Citrix Systems, Inc. All rights reserved. 59

Citrix ADC MPX Series Specifications

General

Type	Application Delivery Controller
Memory	Up to 256 GB
Power Supply	Redundant
Product Series	MPX
Ports	10/25/40/100 Gbps Ethernet
Operating System	Citrix ADC
Management	Citrix ADM
Form Factor	Rack-mountable