293
INJECTION
CHECKS: TURBO PRESSURE
Tools.
[1] Pressure gauge for checking the turbo pressure : 4073-T Toolkit 4073-T
[2] Pressure take-off extension : 8607-T.A
[3] Pressure take-off union and hose : 8607-T.B
[4] Sleeve for checking the turbo pressure : 4185-T
[5] Adaptor sleeve : 4219-T
IMPERATIVE: Respect the safety and cleanliness specific to high pressure diesel injection
engines.
Preliminary operation.
Slacken the clip (1).
Uncouple the air duct (2).
Connect the tool [1] on tool [2] and the tool [3] on tool [2].
Positioning on the vehicle.
Insert the tools [4] and [5] between the air duct (2) and the turbo air cooler outlet at «a».
Connect the tool [3] on tool [4].
Position the tool [1] inside the vehicle.
Start the engine.
Accelerate to 4000 rpm.
The value should be : 1 ± 0,2.
Return the vehicle to conformity.
Remove tools [1], [2], [3], [4] and [5].
Recouple the air duct (2) on the turbo air cooler.
Tighten the clip (1).
B1BP356C
B1HP1ZXC
Engine: RHR
C4
To Next Page
Loading...
