294
INJECTION
CHECKS: TURBO PRESSURE
Tools.
[1] Pressure gauge for checking boost pressure : 4073-T.A Kit 4073-T
[2] Sleeve for checking boost pressure : 4185-T
Checks.
IMPERATIVE: respect the following checking requirements: Engine at running temperature.
Vehicle running at full load.
Preparation.
Remove the collar (3) and the sleeve.
Insert the tool [2] between the pipe (1) and the duct (2).
Position tool [1] in the vehicle.
Connect the pressure gauge [1] to the tool [2] with its tube «a» long enough for the gauge to be
positioned inside the vehicle.
Procedure.
Start the engine.
Engage first gear and start the engine.
Engage the gears up to third gear.
Decelerate to 2000 rpm.
Gradually accelerate.
Check the pressure: 0.95 ± 0.05 bar.
Remove the tools, refit the collars (3) and the sleeve.
B1BP1ZXD
Engine: RHY
XSARA PICASSO
To Next Page
Loading...
