170
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engines: RHL - RHR
Refitting.
Centre the crankshaft pinion (15), using tool [5].
Reposition the timimg belt on the pulley (18).
Put the tool [4] in place (tighten moderately).
Reposition the timimg belt, strip «a» well tensioned, in the following order:
- Guide roller (14).
- Crankshaft pinion (15).
- Coolant pump pinion (16).
- Tensioner roller (17).
Remove tools [4] and [5].
B1EP1FFC
B1EP1FGC
B1EP1FHC
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 170
To Next Page
Loading...
