Clear-Com 4000 II Series User Manual

Technical Manual Issue 2.1 4000 Digital Series II
Page 2 STA0381
4000 Digital Series systems can also be achieved by use of Ethernet, providing an integrated private
intercom network. Up to eight 4000 Digital Series systems can be connected using this facility.
A Conference facility is also available, configured via CMAPSi, which allows people to converse in a
conference mode. This is similar in operation to the Conference Ring (Party Line) facilities available in
older conventional systems. Users can be allowed access to any conference (up to 64 conferences are
allowed) either to listen only or to talk and listen.
Consult the Vitec Group Communications 4000 Series II Installation
Guide for further details on Matrices.
Consult the Vitec Group Communications Network Installation
Guide for details on networking.
CMAPSi operation details are given in the CMAPSi on-line Help facil-
ity and user manual.

Clear-Com 4000 II Series Specifications

General

Brand	Clear-Com
Model	4000 II Series
Category	Control Panel
Language	English