Coastcom D/I Mux III System

Chapter 4. Configuration and Operation
125
MG - Modifying/Setting the Gateway Address
From the AMCU Main Menu, use the MG command to Modify/set the Gateway address. The screen
depicted in Figure 4-16 will appear. The Gateway Address must
be on the same network, both by IP
Address class and by Subnet Mask, as the current AMCU IP Address.
] MG
Changing the Gateway Address requires rebooting the unit.
Do you want to continue [N] y
Do you want to define a gateway? [N] y
Enter the Gateway IP Address [None]: 130.1.10.50
Stand by to reboot. Confirm? [N] y
Password:
Welcome to Coastcom D/I Mux III Configuration System
Copyright (c) 1995 - Coastcom, Alameda, California
15:15:37 06/08/95
Access Level is: 1
Type ? for Help
]VN
15:15:42 ----------[ Network Parameters ]--------- 06/08/95
MAC Address: 00:A0:70:00:00:02
IP Address: 130.1.10.99
Subnet Mask: 255.255.255.0
Default Gateway: 130.1.10.50
SLIP Parameters:
Local IP Address: 130.1.10.98
Peer IP Address: 130.1.10.97
MTU: 1006
Data Rate: 9600
-----------------------------------------------------------
]
Figure 4-26. Modifying the Gateway Address