Coastcom D/I Mux III System - V-Series Commands

D/I Mux III User’s Manual Appendix G. Modem Interfaces
254
V-Series Commands
Additional commands were introduced with the Hayes V-series modems. They are listed and described
in Table I-5.
Table H-5. V-Series Modem Commands
Command Description
N0
N1
Speed control.
Q2
Result code control.
W0
W1
Negotiation result control.
X0
X1
X2
X3
X4
Result code control (see below).
&K0
&K1
&K2
&K3
Flow control.
&L0
&L1
Dial-up line operation.
Conditioned lease-line operation.
&Q5
Error-control mode.