Coastcom D/I Mux III System

To Next Page

To Previous Page

D/I Mux III User’s Manual Appendix G. Modem Interfaces

255

Table I-6 lists and describes the result codes, with associated control, included with the V-series Xn

commands (refer to Table I-5 above).

Table H-6. Result Codes Based On Xn Commands

Commands

Code Verbose X0 X1 X2 X3 X4 X5 X6

0 OK X X X X X X X

1 CONNECT X X X X X X X

2 RING X X X X X X X

3 NO CARRIER X X X X X X X

4 ERROR X X X X X X X

5 CONNECT 1200 X X X X X X

6 NO DIAL TONE X X X

7 BUSY X X X X

8 NO ANSWER (Requires @;

replaces NO CARRIER)

X X X X

9 Reserved

10 CONNECT 2400 X X X X X X

11 RINGING X X

12 VOICE X X

FUNCTIONS

Adaptive Dialing X X X X X

Wait for 2nd Dial Tone (W) X X X X

Wait for Answer (@) X X X X

Fast Dial X X X

Coastcom D/I Mux III System - Page 275