Chapter 4. Configuration and Operation
130
MS - Modifying/Installing the Subnet Mask
From the AMCU Main Menu, type MS to Modify, or install, the Subnet mask. The screen shown in
Figure 4-31 will appear. The Subnet Mask modifies which portion of the IP Address is interpreted as the
network portion. Consult the local LAN administrator prior to setting the IP Address or Subnet Mask.
] MS
Changing Subnet Mask requires rebooting the unit.
Do you want to continue ? [N] y
Enter Subnet Mask [255.255.255.0]: 255.255.0.0
Stand by to reboot. Confirm ? [N] y
Password:
]
Figure 4-31. Modifying the Subnet Mask
To Next Page
Loading...