Coastcom D/I Mux III System User Manual

D/I Mux III User’s Manual Appendix F. MIB II and DS1 MIB Group Names and Objects
228
Table F-1. MIB-II Groups and Objects (Continued)
Group/Object Name Description
ifOperStatus
The current operational state of the interface.
ifLastChange
The value of sysUpTime at the time the
interface entered its current operational state.
ifInOctets
The total number of octets received on the
interface, including framing characters.
ifInUcastPkts
The number of subnetwork-unicast packets
delivered to a higher-layer protocol.
ifInNUcastPkts
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
ifInDiscards
The number of inbound packets which were
chosen to be discarded, even though no errors
had been detected, to prevent their being
deliverable to a higher-layer protocol.
ifInErrors
The number of inbound packets that contained
errors preventing them from being deliverable
to a higher-layer protocol.
ifInUnknownProtos
The number of packets received via the
interface which were discarded because of an
unknown or unsupported protocol.
ifOutOctets
The total number of octets transmitted out of
the interface, including framing characters.
ifOutUcastPkts
The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those
that were discarded or not sent.
ifOutDiscards
The number of outbound packets which were
chosen to be discarded, even though no errors
had been detected, to prevent their
transmission.
ifOutErrors
The number of outbound packets that could not
be transmitted because of errors.
ifOutQLen
The length of the output packet queue (in
packets).
ifSpecific
A reference to MIB definitions specific to the
particular media being used to realize the
interface.

Coastcom D/I Mux III System Specifications

General

Brand	Coastcom
Model	D/I Mux III System
Category	Multiplexer
Language	English