EasyManua.ls Logo

Coastcom D/I Mux III System

Coastcom D/I Mux III System
329 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D/I Mux III User’s Manual Appendix F. MIB II and DS1 MIB Group Names and Objects
234
Table F-1. MIB-II Groups and Objects (Continued)
Group/Object Name Description
tcpEstabResets
The number of times TCP connections have
made a direct transition to the CLOSED state
from either the ESTABLISHED or the CLOSE-
WAIT state.
tcpCurrEstab
The number of TCP connections for which the
current state is either ESTABLISHED or CLOSE-
WAIT.
tcpInSegs
The total number of segments received,
including those received in error.
tcpOutSegs
The total number of segments sent, including
those on current connections but excluding those
containing only retransmitted octets.
tcpRetransSegs
The total number of segments retransmitted,
(i.e., the number of TCP segments transmitted
that contain one or more previously transmitted
octets).
tcpConnTable
A table containing TCP connection-specific
information.
tcpConnEntry
Information about a particular current TCP
connection.
tcpConnState
The only value which may be set by a
management station is deleteTCB (12).
tcpConnLocalAddress
The local IP address for this TCP connection.
tcpConnLocalPort
The local port number for this TCP connection.
tcpConnRemAddress
The remote IP address for this TCP connection.
tcpConnRemPort
The remote port number for this TCP connection.
tcpInErrs
The total number of segments received in error
(e.g., bad TCP checksums).
tcpOutRsts
Number of TCP segments sent containing RST
flag
UDP Group
udpInDatagrams
The total number of UDP datagrams delivered to
UDP users.
udpNoPorts
The total number of received UDP datagrams for
which there was no application at the destination
port.
udpInErrors
The number of received UDP datagrams that
could not be delivered for reasons other than the
lack of an application at the destination port.

Table of Contents