Coastcom D/I Mux III System - Page 291

D/I Mux III User’s Manual Appendix H. Set Report Options
271
SO
Current Mode
TERM - NO ALARM REPORTING
Communication Configuration
C) COMM mode
D) Display Modem/Port expander conf.
M) Change Modem Conf.
P) Change Port Expander Conf.
Q) Quit C
COMM mode:
T) Terminal
M) MML
[TERM] T
Alarm Reporting Mode:
T) Terminal Alarm Reporting
E) Enable Modem Dial-out
O) Off
[TERM - DIALOUT ENABLED] o
Current Mode
TERM - NO ALARM REPORTING
Figure I-3. Setting Communications in Terminal Mode
With Alarm Reporting Turned Off