Coastcom D/I Mux III System - Page 295

D/I Mux III User’s Manual Appendix H. Set Report Options
275
SO
Current Mode
TERM - NO ALARM REPORTING
Communication Configuration
C) COMM mode
D) Display Modem/Port expander conf.
M) Change Modem Conf.
P) Change Port Expander Conf.
Q) Quit C
COMM mode:
T) Terminal
M) MML
[TERM] m
Alarm Reporting Mode:
E) Enable Model Dial-out
D) Disable Modem Dial-out
[MML - DIALOUT DISABLED] d
Current Mode
MML - NO ALARM REPORTING
Figure I-5. Setting Communications in MML Mode
With Modem Dial-Out Enabled