D/I Mux III User’s Manual Appendix I. Traps and Modem Dial Out Configuration
296
INPUT DIAL OUT NUMBERS
The N option of the menu allows the user to input the numbers the modem will use to dial out to. The
“atdt” string is a command string for the modem to go into dial out mode ( any command to a Hays or
Hays comparable modem must start with “at” , which is the attention prefix, followed by, in this case,
“dt”, meaning dial tone, or “dp” for dial pulse).
For example: atdt5239417
See the example on the previous page for a breakdown of the string. There are many other options
available for a particular modem. Please consult your modem manual for further information.
Modify Dial Out Parameters
-------------------------------
M Modem present?
T Timeout
I Modem initialization string
N Dail out numbers
V View dial out parameters
Q Quit
Select parameter to set or modify [Q] n
Dial Out Number Command Strings
----------------------------------------------------------------------
1 atdt5239417
2
3
4
5
------------------------------------------------------------------------
Figure J-9 Input Dial Out Numbers
To Next Page
Loading...