Chapter 5: System operation
120 Full Feature handset operation (SDU)
To adjust the key beep volume
Key beep is a “beep” sound when a key is pressed.
Select Key Beep to view or change the key beep setting of the
handsets.
Use
B and E to adjust the volume of the key beep and C to
confirm.
The value can be Off or between * and ****.
To select the ring tone for a direct call
Single Ring is the ring tone for a direct call (opposite to a broadcast call).
Select Single Ring to view or change the direct ring tone setting of
the current handset.
Use
B and E to scroll through the ring tones and C to select.
You can choose between 8 predefined ring tones.
To select the ring tone for broadcast calls
Common Ring is the ring tone for broadcast calls.
Select Common Ring to view or change the broadcast ring tone setting
of the current handset.
Use
B and E to scroll through the ring tones and C to select.
You can choose between 8 predefined ring tones.
To Next Page
